This is an old revision of the document!
Nanode Gateway
What this does is it accepts an RF packet and dump the same format xAP message onto the Ethernet as the xap_serial program would do.
Which means this one embedded device can replace the base jeenode + xap-serial running on the livebox as a standalone solution.
As this device is acting as a pseudo xap-serial service it will transmit a packet conforming to the xAP Serial Schema see serial schema for more details.
Once the firmware is flashed the only details that requires configuration are the NODE ID, Group and RF Frequency these must be done via the serial interface use to flash the device. The firmware will obtain an IP address via DHCP.
Once operational you will see a heartbeat every 1 minute
xap-hbeat { v=12 hop=1 uid=FFABCD00 class=xap-hbeat.alive source=dbzoo.nanode.gateway interval=60 port=0 }