Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Firmware Updates ====== Periodically check the ADMIN>FIRMWARE tab on the web GUI to see if a new update is available. <note important>If your firmware is really old this TAB won't appear. The build number in the top right hand corner should be there.</note> {{:livebox:firmware-tab.jpg|}} Once installed the Livebox, HAH firmware can be manually updated with the latest version by executing this shell script from the command line prompt. Before doing so, it's best to reboot your HAH (just to ensure that everything is 'clean'). All settings in /etc/ will be preserved. <code> # /etc/init.d/update Ramdisk initialisation ... Connecting to hah.dbzoo.com (193.202.110.14:80) build 100% |*******************************| 4 --:--:-- ETA Connecting to hah.dbzoo.com (193.202.110.14:80) fcp 100% |*******************************| 46216 --:--:-- ETA Connecting to hah.dbzoo.com (193.202.110.14:80) Image.bin 100% |*******************************| 5108k 00:00:00 ETA Erasing blocks: 80/80 (100%) Writing data: 5108k/5108k (100%) Verifying data: 5108k/5108k (100%) Reboot </code> It will only download and reflash if the build is a later version. If you want to force an update, you can specify the word 'force' as a parameter e.g. <code> # /etc/init.d/update force </code> Optional commands: * force - reflash regardless of build number * clean - reset JFFS partition. /mnt/jffs2/jffs2_3 (/etc /home /root /tmp) - This will wipe all custom scripts and setting on your livebox. ====== Backup and Restore ====== {{:livebox:backup-restore.jpg|}} livebox/upgrades_backups.txt Last modified: 2015/04/20 22:14by brett