Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
livebox:universalrfrx [2014/01/18 10:45]
minerva9 [Universal RF Rx]
livebox:universalrfrx [2017/09/15 12:37]
brett
Line 12: Line 12:
 The hardware to slurp and detect what looks like a valid RF signal from all the background noise. ​ With this hardware we don't pre-code what RF signals we are going to look for, which is what most purpose built RF receivers do. The hardware to slurp and detect what looks like a valid RF signal from all the background noise. ​ With this hardware we don't pre-code what RF signals we are going to look for, which is what most purpose built RF receivers do.
  
-The source: ​http://livebox-hah.googlecode.com/svn/trunk/​userapps/​arduinoYou will also need the RFRX Library .+The source: ​https://github.com/dbzoo/hah/​tree/​master/​userapps/​arduino You will also need the RFRX Library .
  
 <​note>​The RFRX library is part of the HAHCentral sketch so by attaching a RF receiver to this existing hardware you can get this functionality for very little extra cost.  Just the cost of a RF Rx unit, which is about 3-4 quid.</​note>​ <​note>​The RFRX library is part of the HAHCentral sketch so by attaching a RF receiver to this existing hardware you can get this functionality for very little extra cost.  Just the cost of a RF Rx unit, which is about 3-4 quid.</​note>​