Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. These instructions will enable you to get a command line prompt on your Joggler using O2 firmware. {{:livebox:p1000639.jpg?800}} Step 1. download ubuntu image and write it to a USB pendrive * http://joggler.exotica.org.uk/img/ubuntu_base_12.04-v1.3-ext4.img.gz * uncompress the GZ file - http://www.7-zip.org/ * Use http://sourceforge.net/projects/win32diskimager/ to write the image. Step 2. Booting and enabling telnetd * Plug in a USB HUB to your joggler and into this the USB stick with Ubuntu and a USB keyboard. * Switch on your joggler and wait for the console login prompt. * Login to Ubuntu mount the O2 firmware and enable the telnetd daemon <code> login: joggler password: joggler sudo su mount /dev/mmcblk0p2 /mnt /mnt/sbin/nvram -w net.login=YES umount /mnt </code> Now you have TELNETD enabled on your Joggler you can use this to setup SSHD. Unplug all the USB devices and reboot. Step 3. Enable SSHD <code> Trying 192.168.1.117... Connected to dhcp-192-168-1-117.local (192.168.1.117). Escape character is '^]'. atom login: root OpenPeak Atom BSP ("Frame") Copyright(C) 2008 OpenPeak, Inc. All rights reserved. # </code> Now that you are in you can setup SSHD <code> cd /tmp wget http://www.dbzoo.com/joggler/breakin wget http://www.dbzoo.com/joggler/payload.tgz chmod 777 breakin ./breakin </code> Step 4. Did you want the iServer + xAP stuff [[xapflash#iserver_installation]] livebox/jogglercommandshell.txt Last modified: 2013/12/11 09:10by minerva9