livebox:buildingfirmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
livebox:buildingfirmware [2012/04/27 16:03] – [Migrating to the HAH firmware?] brettlivebox:buildingfirmware [2012/05/10 07:47] (current) – [Assembling new Firmware (create DWB)] minerva9
Line 153: Line 153:
 </code> </code>
  
-Unfortunately pushing this into the TFTP area and setting up the appropriate link doesn't work. The <note tip>RedBoot needs to be reflashed to tell it not to verify the CRYPTO.\\ see [[#replacing_the_redboot_loader|Replacing the RedBoot loader]]</note> +Unfortunately pushing this into the TFTP area and setting up the appropriate link doesn't work.  <note tip>The RedBoot needs to be reflashed to tell it not to verify the CRYPTO.\\ see [[#replacing_the_redboot_loader|Replacing the RedBoot loader]]</note>
 ==== Importing a new CRAMFS ==== ==== Importing a new CRAMFS ====
 <code> <code>
Line 232: Line 231:
  
 This allows a [[firmware#tftp_server_for_image_downloads]] of a .DWB modified image (that was generated using the **dwbtool** earlier)  to flash, verify and execute successfully. You can also use the [[http://www.dbzoo.com/livebox/firmware#using_the_windows_utility|Windows tool]] to do the same job  This allows a [[firmware#tftp_server_for_image_downloads]] of a .DWB modified image (that was generated using the **dwbtool** earlier)  to flash, verify and execute successfully. You can also use the [[http://www.dbzoo.com/livebox/firmware#using_the_windows_utility|Windows tool]] to do the same job 
- 
-You can find the pre-built HAH .DWB image on the [[livebox/hah|HAH Project]] page. Do note that once you have the HAH firmware image onboard, you need to have a DHCP server on your network. Most folks just use the one that is built in to their internet router. 
  
 ==== Migrating to the HAH firmware? ==== ==== Migrating to the HAH firmware? ====
Line 239: Line 236:
 Now you have done this you can proceed to replace the inventel 5.04 firmware with the HAH firmware.\\ Now you have done this you can proceed to replace the inventel 5.04 firmware with the HAH firmware.\\
 Head back to [[firmware]] for instructions, you are now on step 4. Head back to [[firmware]] for instructions, you are now on step 4.
 +
 ====== Reading Redboot config ====== ====== Reading Redboot config ======
  
  • livebox/buildingfirmware.txt
  • Last modified: 2012/05/10 07:47
  • by minerva9