These instructions will enable you to get a command line prompt on your Joggler using O2 firmware.
Step 1. download ubuntu image and write it to a USB pendrive
Step 2. Booting and enabling telnetd
login: joggler password: joggler sudo su mount /dev/mmcblk0p2 /mnt /mnt/sbin/nvram -w net.login=YES umount /mnt
Now you have TELNETD enabled on your Joggler you can use this to setup SSHD. Unplug all the USB devices and reboot.
Step 3. Enable SSHD
Trying 192.168.1.117... Connected to dhcp-192-168-1-117.local (192.168.1.117). Escape character is '^]'. atom login: root OpenPeak Atom BSP ("Frame") Copyright(C) 2008 OpenPeak, Inc. All rights reserved. #
Now that you are in you can setup SSHD
cd /tmp wget http://www.dbzoo.com/joggler/breakin wget http://www.dbzoo.com/joggler/payload.tgz chmod 777 breakin ./breakin
Step 4. Did you want the iServer + xAP stuff iserver_installation